Ph: 952-469-4832
FX: 952-469-1252

When a wastewater treatment facility has a highly corrosive environment, it is fiscally appealing to forego the eventual refrigerator repair costs and just use a disposable refrigerator. This is why the TC-4 models replace the Marvel™ Stainless Steel refrigerator from the TC-3 with a stainless steel stand and disposable refrigerator. The TC-4 Solo is a composite sampler designed to sample one line of waste or process water. The TC-4 Solo uses one pneumatic arm assembly to sample the water as it flows through the reservoir. One of the key features of the sampler is the unique design of the flow-through reservoir. By design, the reservoir creates turbulence in the area that is sampled. This turbulence ensures that suspended solids of all sizes typically found in wastewater flows are available for sample. As a result, the sample obtained is a true representation of the actual flow. Once the sample has been collected, it is gravity fed to a 2.5 gallon jug stored in the disposable refrigerator. A Bottle Full alarm can be used to stop the sampling and allow a new jug to be placed in the refrigerator.


To make sure that the TC-4 Solo will stand up to the corrosive environment typically found in wastewater treatment facilities, all wetted surfaces of the sampler are made of Stainless Steel, as well as the main wrap, stand, and hardware. All machine screws are treated to prevent seizing and to aid in servicing the sampler.


To facilitate cleaning, funnels are easily removed from the main section of the sampler. Reservoirs can simply be wiped through.


Unique parts features and options

The TC-4 stainless steel refrigerator stand provides 3 distinct advantages over the TC-3
  1. It eliminates costly refrigerator repair.
  2. It reduces weight by 61% when compared to the Marvel™ refrigerator.
  3. It allows you to choose either OEM or aftermarket refrigerators
The TC-4 has 3 options for obtaining composite samples:
  1. A 4-20 mA signal from an automated building management program (PC)
  2. Sampling on a time bases maintained by the control panel
  3. Receiving signals originating at a flow meter
A. Arm Assembly
B. Arm Bracket
C. Right Turn Funnel
D. Main Wrap
E. Sampler Stand
F. Disposable Refrigerator
A. Arm Assembly
B. Clamp Blocks
C. " 10-32 Stainless Steel Machine Screw
D. Arm Bracket
E. Air Filter/Regulator
F. Funnel
G. Reservoir
H. 1" 10-32 Stainless Steel Machine Screw
I. Disposable Refrigerator
J. Sampler Stand
K. 3" ABS Outlet
L. 2" Stainless Steel Inlet